Small corner computer desk – Most standard desktops have become decidedly outdated and inconvenient. Many barely enough room for anything other than home computer. Corner desks solve this problem by providing double the surface area while taking advantage of room space that would otherwise not be utilized. Cut one rectangle of plywood measures 5 meters by 3 meters. Use sawhorses and hand power saw to cut this piece in half width-wise by means of an angled line; this line will range from two meters from the end on the left side up to three meters from the same end on the right side, creating a 45 degree angle cut.
Cut six rectangles measuring 3 1/2 meters with 1 1/2 feet of the legs of the small corner computer desk. Make the short wooden strips to the desktop lip. Collect desktop pieces on top of sawhorses using wood glue and wood biscuits. Cut six to eight seats in each edge of the angled sides of the desk pieces, spacing them evenly and identical, so they will line up when placed together. Apply glue generously to the edges and into the openings. Insert biscuits into the slots on the one hand, before lining the edges up with the other side, shoot biscuits in place as tabs in the slots.
Line up lip pieces to the edge of the desk piece, lining up the four strips desk edges of the same length and location of the lips so they hang from the edge of the small corner computer desk. Secure with inch-long screws, the screws in from the outside of the lip. Use a screw for every six inches.